A very popular high gain antenna, this 2×2 MIMO unit works with all global 2G, 3G, 4G and 5G mobile networks.
The antenna is fully IP67 rated, waterproof, and wind resistant to 120 mph. Consequently, this robust antenna can be positioned outdoors as well as indoors. This results in all-round flexibility for positioning in the optimum location to capture and enhance the best 2G/3G/4G/5G signal available. The antenna comes supplied with 5m MAIN and AUX cables. If additional length is needed to reach your device, extension cables are available in 5m or 10m lengths. Please note that you would need to purchase 2 cables per antenna if you need to extend the length.
The vertical beam width and ‘back to front’ ratio design ensures that the best performance is delivered at all times. The antenna is omni-directional, which makes positioning much easier as you don’t need to know the direction of the nearest mast.
The nominal gain of the antenna is 6dBi. It can be wall or pole mounted and it’s dimensions are 70mm Diameter x 350mm high. It is supplied with fitting brackets and 2 x RG58 cables to SMA Male connectors.
If you have a router that has MIMO capability (both a Main and Aux / Div antenna connections), you absolutely need two antenna for the device to work properly. With this antenna already having 2×2 MIMO capability, you only need one per router saving cost and installation complexity. It is highly recommended where mobile connectivity is to be relied upon.
Frequency: 800-960/1710-2600MHz / 2700 and 3500Mhz
Central point: 800/1800/2600MHz
F/B radio: 8dBi
Polarization Type: Vertical
Vertical beam width: 800-960MHz—40-60°, 1710-2700MHz–14-32° 3500Mhz 10-28°
Rated Power: 100w
Input Impedance: 50 Ohm
Connector Type: SMA Male x 2
Cable type: SSF50 5m long x 2
Operation temperature: -40 to +70 celcius
Water proofing level: IP67
Mounting method: U bolt
Dimensions: 70mm Diameter x 350mm height
Radome Materal: PVC