Flat Panel 2×2 MIMO High Gain 3G, 4G & 5G Antenna

Flat Panel 2×2 MIMO High Gain 3G, 4G & 5G Antenna

£99.00

2×2 MIMO Directional High Gain 3G, 4G and 5G Antenna – IP67 Rated. Supports 5G, 4G, LTE, 3G and GSM frequency bands. Externally mounted.

C365-0738-9X-2 – 2×2 MIMO Directional 4G & 5G Antenna

SKU: C365-0738-9X-2 Category: Tags: , , , ,

Description

C365-0738-9X-2 – 2×2 MIMO Directional 4G & 5G Antenna

The latest addition to our antenna range, this 2×2 MIMO directional unit works with all global 2G, 3G, 4G and 5G mobile networks.

The antenna is fully IP67 rated, waterproof, and wind resistant to 120 mph.  Consequently, this robust antenna can be positioned outdoors as well as indoors.  This results in all-round flexibility for positioning in the optimum location to capture and enhance the best mobile signal available.  The antenna comes supplied with 10m MAIN and AUX cables. If additional length is needed to reach your device, extension cables are available in 5m or 10m lengths. Please note that you would need to purchase 2 cables per antenna if you need to extend the length.  It is not recommended that antenna cables extend further than 15 – 20m due to signal loss.

The antenna is directional, which makes positioning towards a cell site possible to achieve best results.

The nominal gain of the antenna is 7dBi on 3G/4G networks, up to 8.5 on 4G/5G networks depending on frequency.  It can be wall or pole mounted and its dimensions are 180mm width x 300mm high.  It is supplied with fitting brackets and 2 x 10m cables with SMA connectors.

If you have a router that has MIMO capability (both a Main and Aux / Div antenna connections – common on most 4G routers), you absolutely need two antenna for the device to work properly.  With this antenna already having 2×2 MIMO capability, you only need one per router saving cost and installation complexity.  It is highly recommended where mobile connectivity is to be relied upon.

 

Electrical Specifications
Frequency-MHz 698-806 806-960 1710-2700 3300-3800
Gain-dBi 7 8 8.5 8
VSWR <2
Polarization ±45°
Horizontal Beam Width 70-80°
Vertical Beam Width 60-70°
F/B Ratio ≥15dB ≥20dB
Impedance 50 ohms
Max. Input Power 100W
Lightning Protection DC Ground
Mechanical Specifications
Connector SMA male
Dimension 300×180×80 mm
Weight 1.5 kg
Antenna Radome UV Resistance ABS
Cable LMR 240 (10m)
Mounting Mast Ø40-Ø60 mm
Ingress Protection IP67
Rate Wind Velocity 210km/h
Operating Temperature -40℃ – +65℃
Click here for further technical information or contact sales@comms365.com

Reviews

There are no reviews yet.

Be the first to review “Flat Panel 2×2 MIMO High Gain 3G, 4G & 5G Antenna”